Polyair Comfort Medical Pressure Cushion
£453.12 – £505.91
POLYAIR® Comfort medical cushion is designed to reduce the risk of developing pressure ulcers. It combines air cell technology with contoured polyurethane high specification foam technology. The foam surrounds the air cell cushion which can be set to the user’s requirement.
With the POLYAIR® Comfort, only a single compartment insert option is available. However, the foam layer creates stability, while still maintaining the pressure relieving qualities of an air-cell cushion. It also adds an anti-bottoming layer, for additional confidence in the protection against pressure damage.
Description
POLYAIR® Comfort medical cushion is designed to reduce the risk of developing pressure ulcers. It combines air cell technology with contoured polyurethane high specification foam technology. The foam surrounds the air cell cushion which can be set to the user’s requirement.
With the POLYAIR® Comfort, only a single compartment insert option is available. However, the foam layer creates stability, while still maintaining the pressure relieving qualities of an air-cell cushion. It also adds an anti-bottoming layer, for additional confidence in the protection against pressure damage.
Maximum user weight is 22 stone (140kg).
3 Year warranty on all POLYAIR® cushions, and 2 years on covers.
Available with the standard cover or a HD cover with welded seams.
Additional information
| Size | 42cm x 42cm, 45cm x 42cm, 45cm x 46cm |
|---|---|
| Cover | Heavy Duty, Washable (x1), Washable (x2) |
| Downloads |
Insert Inflation Instructions
To appropriately inflate the insert for the POLYAIR® Comfort, please follow the instructions below:
- Before seating the user on the cushion, attach the inflation pump securely to the cushion’s valve, and remove the bulb from the end, by gently pulling it away from the hose.
- Allow at least 1 minute for the air pressure inside the cushion to equalise with the air in the room.
- Re-attach the bulb to the hose, by gently pushing it back into place.
- For every 10kg (1st. 8lbs) of the user’s weight add 1 pump of air into the cushion. We recommend that you round to the nearest 10kg.
- The user can now be seated on the cushion.
- Adjust inflation of the cushion as necessary for comfort, and pressure relief.
N.B. Please note that these are guidelines and the appropriate inflation for each user may vary.
POLYAIR® Comfort Cushion Codes
| Cushion with Standard Cover | Size | Cushion with HD Cover |
|---|---|---|
| P301CMC42421HW | 16×16 in (42x42cm) | P301CMC42421HF |
| P301CMC45421HW | 18×16 in (45x42cm) | P301CMC45421HF |
| P301CMC45461HW | 18×18 in (45x46cm) | P301CMC45461HF |
If you would like to purchase a spare cover at the time of purchasing your cushion, simply replace “1HW” or “1HF” at the end of the cushion code with “2HW” or “2HF”.
(Using HW will result in the standard water-resistant, breathable cover, with an anit-slip base. Using HF will result in the HD cover with welded seams.)
